|
|
|
The value Apple iPod repair parts center.
FOR FREE CHECK-UP - CLICK ME!!
| iPod Quick Links | ||
|---|---|---|
| Free Diagnostic Shipping Directions | iPodParts.com Home Page | Contact Us |
iPod Mini
| iPod Mini Super Capacity Battery - 720mAh - Why settle for less? This is the largest capacity replacement battery available for the iPod Mini. With the same physical dimentions as the original, this battery offers almost twice the capacity as the OEM and most replacements and nearly 25% more than the next closest hi-capacity internal battery. This battery comes with detailed installation instructions , iPod opening tools, and a 00 Phillips screwdriver. Opening the iPod Mini is considerably more difficult than on some of the other iPod models. You can always send the Mini in to have an upgraded battery installed by one of our experienced technicians for a few dollars more. |  Part Price : $25.00 |
| iPod Mini Lcd Screen Replacement Assembly (1st Gen) - We can repair or replace the LCD in your iPod Mini (1st Generation Mini) and get you back in business quickly - This LCD will not fit other Generations of iPod Minis - use the link below to verify you have a 1st Generation Mini). Feeling confident ?- Order just the part below or open a repair order and let our qualified technicians repair or replace your LCD and put that iPod Mini back in service! Use this link to compare iPod mini models before ordering. | Part Price : $35.00 |
| Mini iPod LCD (2nd Generation Mini) - Of all the places for your iPod to land when you dropped it. . . . . . We can repair or replace the LCD in your iPod Mini (2nd Generation Mini) and get you back in business quickly - This LCD will not fit other Generations of iPod Minis - use the link below to verify you have a 2nd Generation Mini). Feeling confident - Order just the part below or open a repair order and let our qualified technicians repair or replace your LCD and put that iPod Mini back in service! Use this link to compare iPod mini models before ordering. | Part Price : $30.00 |
| Mini iPod Mainboard (1st Gen Mini) - "Snap".. "crackle"... "pop".... is this what your digital music sounds like? The mainboard of your 1st generation iPod mini needs to be updated/replaced. Did your iPod take a swim and sizzle the next time you plugged it into a power source? If the iPod is completely dead and the lcd doesn't appear to be broken, chances are that you need a new mainboard. This mainboard is for the 1st generation iPod mini only and will not work in the later model mini. Use this link to compare iPod mini models before ordering. | Part Price : $65.00 |
| Mini iPod Mainboard (2nd Gen Mini) - Did your iPod take a swim and "sizzle" the next time you plugged it into a power source? If the iPod is completely dead and the lcd doesn't appear to be broken, chances are that you need a new mainboard. This mainboard is for the 2nd generation iPod mini only and will not work in the earlier model mini. Use this link to compare iPod mini models before ordering. | Part Price : $45.00 |
| Mini iPod Click-Wheel Assembly (1st Gen Mini) - Top 3 reasons you need a new click-wheel for your iPod mini: 1. Fido needs obedience school and your iPod won't work with his teeth marks in the wheel. 2. You took the mini apart and ripped the connector from the end of the ribbon cable and don't want anyone to know 3. Things just aren't "clicking" anymore This click-wheel is for the 1st generation iPod mini only and will not work in the later model mini. Use this link to compare iPod mini models before ordering. This part is no longer available as a do-it-yourself kit - this repair is only available at our service center as a mail-in repair. | Part Price : $0.00 |
| PDASmart PDA Tool Kit - T5, T6, 00 Phillips, Flat, Case Tool - The iPodParts PDA Tool Kit contains the following micro-precision tools: T5 Torx Driver, T6 Torx Driver, 00 Phillips Screwdriver, Flat Head Screwdriver and Nylon Case opening Tool. Make sure you have the correct tool for the job - this PDA Tool Kit has been assembled by our technicians for PDA repairs (but contains the necessary tools for most small electronic devices - cellphones, cameras, etc..). | Part Price : $9.95 |
| Mini iPod Click-Wheel Assembly (2nd Gen Mini) - If things just aren't "clicking" anymore or there is damage to your wheel assembly (torn cable, connectors, etc..), you probably need a new click-wheel. This click-wheel is for the 2nd generation iPod mini only and will not work in the earlier model mini. Use this link to compare iPod mini models before ordering this service. We do not offer this part for do-it-yourself repair, you will need to send your iPod in to our repair center and let one of our qualified technicians do the transplant. | Part Price : $35.00 |
| Mini 4gb iPod Hard Drive (1st Generation Mini) - This is a replacement Hitachi 4gb Microdrive for your iPod Mini. iPod not working? Hold it close to your ear and listen for that sick grinding sound - that is the bad hard drive. The replacement hard drive comes with a 90-day warranty. This is not the easiest repair to perform but you may order the part below or send it in for one of our qualified technicians to handle. This drive works with the 1st Generation iPod Mini 4gb only. Use this link to compare iPod mini models before ordering. | Part Price : $50.00 |
| iPod Mini 4gb Hard Drive (2nd Generation Mini) - This is a replacement Hitachi 4gb Microdrive for your iPod Mini. iPod not working? Hold it close to your ear and listen for that sick grinding sound - that is the bad hard drive. The replacement hard drive comes with a 90-day warranty. This is not the easiest repair to perform but you may order the part below or send it in for one of our qualified technicians to handle. This drive works with the 2nd generation iPod Mini 4gb only . Use this link to compare iPod mini models before ordering. | Part Price : $45.00 |
| Mini iPod Silver Casing (1st or 2nd Gen) - This is a replacement casing for your iPod mini. Did grandma give you a pink mini for your birthday? Are you reminded of a former love everytime you read the sentimental engraving on the back? iPod look like hell ? Just ready for a change?....... This is a new silver casing to fit the iPod mini (1st or 2nd Gen). This casing is silver in color and does not include the click-wheel, the audio jack or sync port plastics on the top / bottom or the clear lcd cover. The entire "guts" of the iPod are built into the casing, so if this seems like more of a challenge than you are willing to handle, send it in for one of our qualified technicians to perform the plastic surgery for just a few dollars more. This is a SILVER casing for the iPod Mini Only. | Part Price : $20.00 |
| iPod Mini 6gb Hard Drive (2nd Generation) - This is a replacement Hitachi 6gb Microdrive for your iPod Mini. iPod not working? Hold it close to your ear and listen for that sick grinding sound - that is the bad hard drive. The replacement hard drive comes with a 90-day warranty. This is not the easiest repair to perform but you may order the part below or send it in for one of our qualified technicians to handle. This drive works with the 2nd generation iPod Mini 4gb as an upgrade or as a replacement for the 6gb . | Part Price : $65.00 |
| iPod Mini Plastic Top (1st or 2nd Gen) - This is the top white plastic that includes the plastic hold button. If you are missing the top part of your mini or damaged it during a routine battery replacement, here you go. Very easy to install. | Part Price : $5.00 |
| iPod Mini Plastic Bottom (1st or 2nd Gen) - This is the bottom white plastic on your mini missing? If you are missing the bottom part of your mini or damaged it during a routine battery replacement, here you go. Very easy to install. | Part Price : $5.00 |
| iPod Mini Hard Drive Cable (1st or 2nd Gen) - Did you damage your hard drive cable while repairing your iPod? If so, this will get you back up and going. This is only the hard drive cable. | Part Price : $10.00 |
| iPod Mini Headphone Jack (1st or 2nd Gen) - Can you hear your songs coming out of your iPod? Are you hearing one channel? Most likely, you will need a new audio jack. If you think you could have something else wrong or not sure, take advantage of our NO DIAGNOSTIC Charge. | Part Price : $30.00 |
| iPod Mini Metal Cage (1st or 2nd Gen) - This is the bottom metal cage that holds your guts in the iPod. If you are missing the bottom part of your mini or damaged it during a routine battery replacement, here you go. Very easy to install. | Part Price : $5.00 |
| Innopocket iPod Mini Hard Case - The Metal Deluxe Case for Apple iPod Mini series is made of 100% anodized aircraft-grade aluminum. The case is designed to preserve the sleek profile of the iPod Mini and still gives full access to your digital music player while in case. Cutouts give easy access to headphone port, remote port and all vital iPod controls. The interior of the case is lined with neoprene to cushion your iPod from impact shocks. With this form-fitting metal case, your iPod investment is well protected. This Innopocket iPod Mini case comes with a removable belt clip and post system. | Part Price : $22.00 |
| iPod Mini Silicone Gel Case (with swivel clip) - This clear silicone gel case for the iPod Mini surrounds your vulnerable iPod with a soft silicone skin. This case comes complete with a detachable swivel belt clip and carrying strap. This case preserves the stylish appearance of your iPod but makes it much easier to grip in your hand or on your car's dashboard. With this form-fitting silicone case, your iPod investment is well protected. | Part Price : $9.00 |
| iPod Case Opening Tools - Please don't open your iPod's case with a screwdriver! These tools are made of a special nylon polymer that is hard enough to get the case open but not hard enough to crack and chip the acrylic front case. These are the same tools that come with our battery kits and are preferred by iPod mechanics worldwide. These tools come two per set. If you open your iPod's case with anything else, you do so at your own peril. | Part Price : $4.00 |
| iPod OEM EarBuds and Foam Pads - These are OEM Apple iPod earbuds. Each set of earbuds includes two sets (4pcs) of replacement foam pads. Our repair center looks at dozens of iPods every day that require repairs (sometimes expensive) because of damage caused to the audio jack by aftermarket earbuds/headphones. If the lenth of the plug is too long, the audio jack of the iPod itself is damaged, audio is distorted or one channel drops from the audio output. Eliminate the possibility of damage and make your iPod sound like it did when you first got it. | Part Price : $10.00 |
| iPod Wall Charger (FIREWIRE) - Use an extra iPod Power Adapter for home, office or travel. The FireWire based adapter allows you to charge your iPod when not connected to a computer. Just plug the adapter into a wall outlet and (depending on model) connect a FireWire cable or iPod Connector to FireWire cable to your iPod for recharging (refer to your iPod User Manual for correct cable type). Supports all iPods. | Part Price : $18.00 |
| iPod Wall Charger (USB) - Use an extra iPod Power Adapter for home, office or travel. This is an USB wall charger that is used to charge your iPod from any 110v outlet instead of always having a computer around. Most of the new ipods do not come with these, but they are sure handy to keep around. | Part Price : $16.00 |
| Retractable USB Sync Cable - 3G/4G/iPod Mini - Direct from the Brando Workshop. Mini retractable USB to iPod cable for HotSyncing the iPod Photo, 3rd Generation, 4th Generation iPod and iPod Mini (Units with the Sync Port/Dock Connector on bottom). This short short cable is easier for carrying anywhere and one quick pull on the cable ends extends the cable to a full 31 inches and allows you to sync your data on the go. If you just buy one accessory for your iPod, this is on the one to get. | Part Price : $14.00 |
| Retractable FireWire Sync-and-Charge Cable - 3G/4G/iPod Mini - Direct from the Brando Workshop. Mini retractable FIREWIRE to iPod cable for HotSync and battery charging for the 3rd Generation iPod, 4th Generation iPod and iPod Mini (Units with the Sync Port/Dock Connector on bottom). This short short cable is easier for carrying anywhere and one quick pull on the cable ends extends the cable to a full 31 inches and allows you to sync your data and charge your pda direct through the sync port - there is no need for a seperate charger. If you just buy one accessory for your iPod, this is on the one to get. | Part Price : $14.00 |
| Premium iPod Car Charger - The Auto/Car Charger works in all iPods with the sync port on the bottom of the unit. Never be without your tunes... keep that lithium battery topped off whenever possible. How can you live without this? | Part Price : $14.00 |
| iPod OEM USB Sync Cable - This is the OEM USB sync cable for your iPod. The most common cause of syncing problems - you can't afford to not have an extra (and you can't just pick these up anywhere when you need one). Every iPod user needs at least one extra cable and the smart owner will have a couple of extras. | Part Price : $10.00 |
| iPod OEM Firewire Sync Cable - This is the OEM FIREWIRE sync cable for your iPod. The most common cause of syncing problems - you can't afford to not have an extra (and you can't just pick these up anywhere when you need one). Every iPod user needs at least one extra cable and the smart owner will have a couple of extras. | Part Price : $10.00 |
| iPod Mini Clip - These are OEM Apple iPod Mini clips. This is the same clip that came with your Mini when it was brand new. Now that you've tried all of the other carrying methods for your Mini - go back to the one you liked the best. | Part Price : $10.00 |
This web store is owned and operated by
Optimistic Enterprises, Inc.
715 Discovery Blvd., Suite 506 ~ Cedar Park, TX 78613
Phone: (512)528-0333 ~ Fax: (512)528-0384 ~ Email:
sales@ipodparts.com
Terms and Conditions of Sale - Return, Refund and Exchange Policy
